[default.probe]
# USB vendor ID
# usb_vid = "1337"
# USB product ID
# usb_pid = "1337"
# Serial number
# serial = "12345678"
# The protocol to be used for communicating with the target.
protocol = "Swd"
# The speed in kHz of the data link to the target.
# speed = 1337

[default.flashing]
# Whether or not the target should be flashed.
enabled = true
# Whether or not bytes erased but not rewritten with data from the ELF
# should be restored with their contents before erasing.
restore_unwritten_bytes = false
# The path where an SVG of the assembled flash layout should be written to.
# flash_layout_output_path = "out.svg"
# Triggers a full chip erase instead of a page by page erase.
do_chip_erase = false
# Whether to disable double buffering
disable_double_buffering = false
# Whether to verify flash contents after downloading
verify = true

[default.reset]
# Whether or not the target should be reset.
# When flashing is enabled as well, the target will be reset after flashing regardless of this setting.
enabled = true
# Whether or not the target should be halted after reset.
halt_afterwards = false

[default.general]
# The chip name of the chip to be debugged.
chip = "STM32L010RBTx"
# A list of chip descriptions to be loaded during runtime.
chip_descriptions = []
# The default log level to be used. Possible values are one of:
#   "OFF", "ERROR", "WARN", "INFO", "DEBUG", "TRACE"
#   If not set, the `RUST_LOG` environment variable will be used.
log_level = "WARN"
# Use this flag to assert the nreset & ntrst pins during attaching the probe to the chip.
connect_under_reset = false

[default.rtt]
# Whether or not an RTTUI should be opened after flashing.
enabled = true
# The duration in ms for which the logger should retry to attach to RTT.
timeout = 10000
# Whether to save rtt history buffer on exit.
log_enabled = true
# Where to save rtt history buffer relative to manifest path.
log_path = "./target/logs"
# A list of up (target -> host) channel settings associations to be displayed. If left empty, all channels are displayed.
# object key  - RTT channel identifier number
# mode     (Optional) - RTT operation mode. Describes how the target handles RTT outputs that won't
#                       fit in the buffer. If left unset, the firmware will determine the default
#                       for each RTT up channel.
#              * NoBlockSkip - Skip writing the data completely if it doesn't fit in its
#                            entirety.
#              * NoBlockTrim - Write as much as possible of the data and ignore the rest.
#              * BlockIfFull - Spin until the host reads data.  Can result in app freezing.
# format   (Optional) - How to interpret data from target firmware.  One of:
#              * String - Directly show output from the target (default)
#              * Defmt  - Format output on the host, see https://defmt.ferrous-systems.com/
#              * BinaryLE - Display as raw hex
# show_location (Optional) - Whether to show the location of defmt messages in the UI.
# show_timestamps (Optional) - Whether to show the timestamps of String and Defmt messages in the UI, if available.
# socket   (Optional) - Server socket address (for optional external frontend or endpoint).
# log_format (Optional) - Control the output format for `format = Defmt`.
up_channels = [
    # { channel = 0, mode = "BlockIfFull", format = "Defmt", show_location = true },
    # { channel = 1, mode = "BlockIfFull", format = "String", show_timestamps = false, socket = "127.0.0.1:12345" },
]

# A list of down (host -> target) channel settings. You can select a down channel for each UI tab,
# which will be used to send data to the target.
# object key  - RTT channel identifier number
# mode     (Optional) - RTT operation mode. Describes how the target handles RTT outputs that won't
#                       fit in the buffer. If left unset, the firmware will determine the default
#                       for each RTT down channel.
down_channels = [
    # { channel = 0, mode = "BlockIfFull" }
]

# UI tab settings. All up channels are displayed, except when hidden here. You can specify how each
# tab is displayed and whether they allow sending data to the target.
# up_channel              - The channel_number of the RTT up channel to display
# hide         (Optional) - Whether to hide the tab. Defaults to false.
# down_channel (Optional) - The channel_number of the RTT down channel to use for this tab.
# name         (Optional) - String to be displayed in the RTTUI tab. Defaults to the channel name.
tabs = [
    # { up_channel = 0, down_channel = 0, name = "My channel" },
    # { up_channel = 1, hide = true },
]

[default.gdb]
# Whether or not a GDB server should be opened after flashing.
enabled = false
# The connection string in host:port format wher the GDB server will open a socket.
gdb_connection_string = "127.0.0.1:1337"